Sarah Saves: My “Custom” Basement Shower

Sarah B.

Sarah B.

I love saving, whether it’s time or money or the planet. It gives me a great deal of satisfaction, and it allows me to channel my “do it yourself” energy in a lot of different ways.

When Kevin and I decided it was time to tackle our basement, I knew we had to keep the costs down. I also wanted a nice shower – one with a custom feel that set it apart from your typical inexpensive fiberglass or acrylic surround with a curtain.

I decided to tile the shower walls, so I started with a standard sized shower pan. I picked the pan I wanted instead of tiling the floor because it’s less expensive and easier to execute, especially for a DIY’er. When you’re tiling a shower floor, you have to get the right slope for the drain if you don’t want to experience leaks down the road. If that doesn’t scare you from attempting it, consider a pre-molded base that’s ready to have the tile applied to it, like those from Tile Redi.

I love the look of thin, rectangular marble tiles, but they were too expensive for my budget. To cut costs, I bought 12 x 12 marble tiles at Home Depot for $3.99 a square foot and cut them down to 3 x 12. Home Depot sells by the individual tile, so I was able to buy a bunch of boxes and sort through them, picking ones I thought looked good together and returning the rest. I sanded one tile down with an orbital sander and 600 grit wet or dry sandpaper to see if I preferred a honed look, but I ended up preferring the polished look.

If you’re considering using marble tile in a bathroom, make sure to research all the pros and cons. It’s also a good idea to seal polished marble before and after grouting to avoid a cloudy finish on the tile when you wipe off the grout.

Curtains in bathrooms are not my thing, so we purchased a pre-made clear glass door enclosure from Overstock. (I got it for $750 with a coupon, it’s now listed at $944.99 – timing is everything!) It obviously set me back more than a rod and curtain would have, but it was cheaper because we installed it ourselves.

I do not miss that border at all.

I do not miss that border one tiny bit.

The finishing touch – a wood shower grate to hide most of the inexpensive white shower floor. You can buy pre-made grates out of teak, but that can get costly – somewhere between $150 to $200. We made one from clear cedar and stained it to match the vanity, then sealed it with an outdoor use poly. It has rubber feet and can be removed for cleaning, and we used decking screws so they wouldn’t rust. We paid about $40 for the wood, so you do the math.

Since this shower isn’t used constantly, our homemade grate has held up well, and overall, the project has added to our basement’s versatility. I can send houseguests down there to shower and feel good doing it!

– Sarah B.

shower-grate

We made our shower grate out of cedar and stained it to match the vanity.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s